JJ Tools
3ARE 060 150 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 6.0mm | 10mm | 15mm | 50mm | 6mm |
Login to view price
Filter By
Filter By
3ARE - 3 Flutes Semi-Finishing and Roughing End Mills
- End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress.
- Minimize built up edge by double edge and deep pocket design for good chip evacuation.
- Excellent work surface finishing.
JJ Tools
3ARE 060 200 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 6.0mm | 15mm | 20mm | 70mm | 6mm |
Login to view price
JJ Tools
3ARE 080 200 S08
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 15mm | 20mm | 60mm | 8mm |
Login to view price
JJ Tools
3ARE 080 250 S08
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 20mm | 25mm | 80mm | 6mm |
Login to view price
JJ Tools
3ARE 100 250 S10
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 10.0mm | 18mm | 25mm | 70mm | 10mm |
Login to view price
JJ Tools
3ARE 100 300 S10
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 10.0mm | 23mm | 30mm | 90mm | 10mm |
Login to view price
JJ Tools
3ARE 120 300 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 20mm | 30mm | 80mm | 12mm |
Login to view price
JJ Tools
3ARE 120 400 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 30mm | 40mm | 100mm | 12mm |
Login to view price
JJ Tools
3ARE 160 350 S16
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 16.0mm | 25mm | 35mm | 110mm | 16mm |
Login to view price
JJ Tools
3ARE 160 500 S16
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 16.0mm | 35mm | 50mm | 120mm | 16mm |
Login to view price
JJ Tools
3ARE 200 500 S20
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 20.0mm | 35mm | 50mm | 110mm | 20mm |
Login to view price
JJ Tools
3ARE 200 600 S20
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 20.0mm | 45mm | 60mm | 120mm | 20mm |
Login to view price