JJ Tools
4HEM 080 200 S08
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 20.0mm | - | 60mm | 8mm |
Login to view price
Filter By
Filter By
4HEM - 4 Flutes High Speed 45° Helix End Mills
- Endmills for pre-hardened and hardened steel (HRc50~62).
- Good wear resistance by high quality Si-based PVD coating.
- High precise edge tolerance.
- Reinforced edge design for preventing edge chipping.
- 45º degree helix design for high speed, high feed condition.
- Outstanding performance at high speed machining by ultra fine (0.2µm) WC grade.
Filter By
JJ Tools
4HEM 080 250 S08
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 25.0mm | - | 70mm | 8mm |
Login to view price
JJ Tools
4HEM 080 300 S08
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 30.0mm | - | 75mm | 8mm |
Login to view price
JJ Tools
4HEM 080 400 S08
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 40.0mm | - | 90mm | 8mm |
Login to view price
JJ Tools
4HEM 250 800 S25
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 25.0mm | 80.0mm | - | 160mm | 25mm |
Login to view price