JJ Tools
4HEM 010 050 S06
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.0mm | 5.0mm | - | 45mm | 6mm |
Login to view price
Filter By
Filter By
4HEM - 4 Flutes High Speed 45° Helix End Mills
- Endmills for pre-hardened and hardened steel (HRc50~62).
- Good wear resistance by high quality Si-based PVD coating.
- High precise edge tolerance.
- Reinforced edge design for preventing edge chipping.
- 45º degree helix design for high speed, high feed condition.
- Outstanding performance at high speed machining by ultra fine (0.2µm) WC grade.
JJ Tools
4HEM 015 080 S06
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.5mm | 8.0mm | - | 45mm | 6mm |
Login to view price
JJ Tools
4HEM 020 080 S06
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.0mm | 5.0mm | - | 45mm | 6mm |
Login to view price
JJ Tools
4HEM 030 080 S06
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 3.0mm | 8.0mm | - | 45mm | 6mm |
Login to view price
JJ Tools
4HEM 040 110 S06
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 4.0mm | 11.0mm | - | 45mm | 6mm |
Login to view price
JJ Tools
4HEM 250 800 S25
| Diameter (D) | Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 25.0mm | 80.0mm | - | 160mm | 25mm |
Login to view price