JJ Tools
6JJHE 030 200 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 3.0mm | 20mm | - | 60mm | 6mm |
Login to view price
Filter By
Filter By
6JJHE - 6 & 8 Flutes 45° Helix End Mills
- Endmills for pre-hardened and hardened steel (HRc52~65).
- Good wear resistance by high quality Si-based PVD coating.
- Precise run-out and tolerance for finish machining.
- Reinforced edge design for preventing edge chipping.
- 45º helix design for high speed, high feed condition.
- Outstanding performance at high speed machining by ultra fine
(0.2µm) WC grade.
Filter By
JJ Tools
6JJHE 040 200 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 4.0mm | 20mm | - | 60mm | 6mm |
Login to view price
JJ Tools
6JJHE 050 200 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 5.0mm | 20mm | - | 60mm | 6mm |
Login to view price
JJ Tools
6JJHE 060 200 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 6.0mm | 20mm | - | 60mm | 6mm |
Login to view price
JJ Tools
6JJHE 080 200 S08
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 20mm | - | 60mm | 8mm |
Login to view price