JJ Tools
4JJHE 120 260 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 26.0mm | - | 75m | 12mm |
Login to view price
Filter By
Filter By
4JJHE - 45° Helix End Mills
- Endmills for pre-hardened and hardened steel (HRc52~65).
- Good wear resistance by high quality Si-based PVD coating.
- Precise run-out and tolerance for finish machining.
- Reinforced edge design for preventing edge chipping.
- 45º helix design for high speed, high feed condition.
- Outstanding performance at high speed machining by ultra fine
(0.2µm) WC grade.
JJ Tools
4JJHE 120 350 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 35.0mm | - | 90m | 12mm |
Login to view price
JJ Tools
4JJHE 120 500 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 50.0mm | - | 100m | 12mm |
Login to view price
JJ Tools
4JJHE 120 600 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 60.0mm | - | 110m | 12mm |
Login to view price
JJ Tools
4JJHE 200 400 S20
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 20.0mm | 40.0mm | - | 100m | 20mm |
Login to view price
JJ Tools
4JJHE 200 550 S20
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 20.0mm | 55.0mm | - | 120m | 20mm |
Login to view price
JJ Tools
4JJHE 200 750 S20
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 20.0mm | 75.0mm | - | 150m | 20mm |
Login to view price