JJ Tools
4JJHE 010 015 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.0mm | 1.5mm | - | 40mm | 6mm |
Login to view price
Filter By
Filter By
4JJHE - 45° Helix End Mills
- Endmills for pre-hardened and hardened steel (HRc52~65).
- Good wear resistance by high quality Si-based PVD coating.
- Precise run-out and tolerance for finish machining.
- Reinforced edge design for preventing edge chipping.
- 45º helix design for high speed, high feed condition.
- Outstanding performance at high speed machining by ultra fine
(0.2µm) WC grade.
Filter By
JJ Tools
4JJHE 010 025 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.0mm | 2.5mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 010 035 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.0mm | 3.5mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 015 040 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.5mm | 4.0mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 015 060 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.5mm | 6.0mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 015 080 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.5mm | 8.0mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 020 030 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 2.0mm | 3.0mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 020 050 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 2.0mm | 5.0mm | - | 40mm | 6mm |
Login to view price
JJ Tools
4JJHE 020 080 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 2.0mm | 8.0mm | - | 40mm | 6mm |
Login to view price