JJ Tools
4JJHE 015 040 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 1.5mm | 4.0mm | - | 40mm | 6mm |
Login to view price
Filter By
Filter By
4JJHE - 45° Helix End Mills
- Endmills for pre-hardened and hardened steel (HRc52~65).
- Good wear resistance by high quality Si-based PVD coating.
- Precise run-out and tolerance for finish machining.
- Reinforced edge design for preventing edge chipping.
- 45º helix design for high speed, high feed condition.
- Outstanding performance at high speed machining by ultra fine
(0.2µm) WC grade.
Filter By
JJ Tools
4JJHE 050 250 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 5.0mm | 25.0mm | - | 70m | 6mm |
Login to view price
JJ Tools
4JJHE 060 250 S06
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 6.0mm | 25.0mm | - | 70m | 6mm |
Login to view price
JJ Tools
4JJHE 080 250 S08
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 8.0mm | 25.0mm | - | 70m | 8mm |
Login to view price
JJ Tools
4JJHE 120 260 S12
|
Diameter (D) |
Length of Cut (L1) | Effective Length (L2) | Overall Length (L) | Shank Diameter (d) |
|---|---|---|---|---|
| 12.0mm | 26.0mm | - | 75m | 12mm |
Login to view price