For Aluminium

3ALR - 3 Flutes 45° Helix Rib End Mills

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Tetrabond TaC coating provides excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

2ALE - 2 Flutes 45° Helix End Mills

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

2ALEC - 2 Flutes 45° Helix End Mills (TaC Coating)

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Tetrabond TaC coating provides excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

3ALE - 3 Flutes 45° Helix End Mills

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

3ALEC - 3 Flutes 45° Helix End Mills (TaC Coating)

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Tetrabond TaC coating provides excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

3ALC - 3 Flutes 45° Helix Corner Radius End Mills

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

3ALCC - 3 Flutes 45° Helix Corner Radius End Mills (TaC coating)

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Applied short flute length for various applications.</li> <li>Tetrabond TaC coating provides excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

3ARE - 3 Flutes Semi-Finishing and Roughing End Mills

<ul style="list-style-type:disc;"><li>End Mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>JCRO coating provides wear resistance improvement as well as avoid edge stress.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> <li>Excellent work surface finishing.</li> </ul>

3ARO - 3 Flutes 45° Helix Roughing End Mills

<ul style="list-style-type:disc;"><li>High speed semi-finishing and roughing end mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

3AROC - 3 Flutes 45° Helix Roughing End Mills (TaC Coating)

<ul style="list-style-type:disc;"><li>High speed semi-finishing and roughing end mills for Aluminum Alloy, Non-Ferrous and Non-Metallic materials.</li> <li>Applied fine WC grade for excellent surface finish. </li> <li>Tetrabond TaC coating provides excellent work surface finish by high hardness and low friction.</li> <li>Minimize built up edge by double edge and deep pocket design for good chip evacuation.</li> </ul>

Subcategories

3ALR - 3 Flutes 45° Helix Rib End Mills

2ALE - 2 Flutes 45° Helix End Mills

2ALEC - 2 Flutes 45° Helix End Mills (TaC Coating)

3ALE - 3 Flutes 45° Helix End Mills

3ALEC - 3 Flutes 45° Helix End Mills (TaC Coating)

3ALC - 3 Flutes 45° Helix Corner Radius End Mills

3ALCC - 3 Flutes 45° Helix Corner Radius End Mills (TaC coating)

3ARE - 3 Flutes Semi-Finishing and Roughing End Mills

3ARO - 3 Flutes 45° Helix Roughing End Mills

3AROC - 3 Flutes 45° Helix Roughing End Mills (TaC Coating)

Follow Us

Settings

Menu

Search